Posted in How to, New Stuff

Experiments in Tape Pt. 2

To pick up where I left off yesterday, while I was letting those tape samples sit for a couple of days, I wondered what other tapes I could paint and decorate and use for random things.

So, I went rummaging through my bathroom cupboards at 2 am (as ya do. 😀 ) and found some paper medical tape, and some relatively wide sort of shiny fabric medical tape. I treated them both the same way I did the masking tape-I taped them down to the plexiglass on my studio table and I painted them. This time, though, I painted some with watercolors as I had been, and some with acrylics ( I used cheapy “art” acrylics in a tube because I had them handy, but I’m assuming craft acrylics would work the same way). I had my doubts about the acrylics because I thought they might dry too hard or flake off or something.

The top and bottom in this pic were done with acrylic, middle two with watercolors.

14249769_10154652049809994_3654519762888291267_o

The top two are the paper tape, the bottom two-the shiny fabric tape.

I’ll be straight up-the paper tape sucked. The watercolors looked crappy and neither sample strip wanted to come up off the plexiglass. The watercolor strip pretty much shredded, the acrylic strip ended up being pretty hard and weird.

The fabric tape did much better. The watercolor strip worked really well. The colors were muted a bit, sure, but I like that. And it retained it’s shininess. The acrylic strip turned out alright. I didn’t like the way it changed the texture so I likely won’t use acrylics with it again. But it wasn’t the disaster I thought it might be.

Ok, so I rolled these bits up on straws and put them away because it was time to get out the earlier test pieces.

I wanted to see how they would look *in* a project, and I wanted to see how repositional they are. That’s important to me, because when I make things I fiddle with layout a lot.

tapething2

Here’s a page from my planner (Look, don’t judge, this keeps me from freaking out about everything, all the time. 🙂 ) taken from my phone in the middle of the night, because that’s how I’ve been rolling, lately. 🙂

The masking tape is still a wee bit transparent, like normal, and like washi. It is easily repositional and looks relatively cute. I’ll call that a win. 😀

Ok, so I did one last test with the spiral fabric tape strips. I wanted to see how they acted on paper.

0911161438

I grabbed a couple pieces and just really quickly taped a couple pieces down. (With a guest appearance from a failed bit of stamping on another piece of masking tape!)

I repositioned the pieces several times, to see how well they pulled up, and they worked great. The spiral tape on the left is with acrylic, the the spiral tape on the right is both-the green and yellow is watercolor, the reddish brown is acrylic.

I like the way the masking tape and the fabric tape work, so much that I’m seriously thinking about adding some to the Etsy store, along with the other paper related things that are going up soon.

Either way, it’s a great way to add some personalization to your creative endeavors. I know I’ll be using these tapes all over the place!

Let me know what ya’ll think.

~T

Posted in How to, New Stuff

Experiments in Tape

I may have a problem, I know. When I discovered pocket letters, I also discovered washi tape.

verticallace-washi-tape

It’s basically decorative, repositionable tape. The term “washi tape” is from Japanese masking tape, which is made from rice paper, but the term lately encompasses quite a variation of products. You can use it to decorate all kinds of stuff. I even have some that’s colorable. 😀 (This pleases me so much!)

Anyway, as I always want to be creating things, I started wondering how I’d go about making some kind of decorative tape. After watching a few tutorials on “Making your own washi!” I decided to try it myself. I found myself pretty dissatisfied with the tutorials because none of them showed how or whether they would actually work in a project.

So, I set out to see what I could learn. Initially, my idea was to figure out how to make “washi” type tape. That’s not what any of this is, but it’s still pretty cool, and I’m already thinking about things I can do with it. 🙂
This is my first try. It’s plain old masking tape, watercolors and stamps. It’s a lot more muted than I like, and in fact, just kinda looks dirty (haha), but it served its purpose as a learning experience. The nature of the tape didn’t change any. It’s still mostly repositionable masking tape. And the ink is just random permanent stamping ink that I’ve had forever.14195409_10154641893764994_2180904997879658014_o
After that, I had a pretty good idea what I wanted to do, so I tried again, with several strips this time. I got better color with no loss of stickiness or texture, and this time I stamped with some white chalk ink that I had. This took longer to set/dry (I let them air dry) than the black ink, but once it was totally dry, it seemed set (It didn’t rub off on anything).14257610_10154642034449994_195262201456224380_o

At this point, I rolled the pieces up onto a drinking straw (Well, first, I’d wrapped them onto a playing card thing that I use to stick washi samples on, but then hubby found a box of drinking straws in a cupboard, so I switched them. It was a good way to check restickability as well.) and I put them away for a couple days.

Tomorrow, I’ll talk about the rest of the experiment, how other types of tape worked for me, and the general outcome. 🙂

Posted in How to

How to Measure Your Ring Size Without A Printer

GarnetRoseGoldRing2

When you see me in person to size a ring, I’ve got the fancy ring sizers. (Well, I think they’re fancy!)  Generally when you order online from me, I’ll direct you to any number of printable ring sizers.  They’ve got varying degrees of accuracy, but I can work with them.

So, what happens if you don’t have a printer? Well, since this happened very recently with me, I got to looking on the internet to see what I could find.  I don’t know if this is a perfect fix, but it’s a start, anyway!  Feel free to try it out and let me know how it coincides!

What you’ll need:

A ruler and a thin strip of paper. That’s it! Oh, and scissors to cut the paper!

  1. Take the scissors and cut a thin strip of paper.
  2. Wrap the paper around the finger you want to measure. Try to keep the paper near your knuckle, because a ring has to be able to go over your knuckle.
  3. Mark the spot where the paper meets and measure the distance with your ruler.
  4. Use this little chart thing to determine your ring size. Rings also come in half sizes, the measurements of which will fall somewhere in between the whole sizes.

I found this chart online, so no credit to me. 🙂

Size 4: 1 13/16 inches

Size 5: 1 15/16 inches

Size 6: 2 1/16 inches

Size 7: 2 1/8 inches

Size 8: 2 1/4 inches

Size 9: 2 5/16 inches

Size 10: 2 7/16 inches

Size 11: 2 9/16 inches

Size 12: 2 5/8 inches

Size 13: 2 3/4 inches

Size 14: 2 7/8 inches